top of page
Hydro CYL is our own branded product range made to our specification by Telford Cylinders. The Hydro CYL range is both pre-plumbed and pre-wired for ease of installation, which also comes with an internal 4-port buffer tank for system hydraulic separation. The hydraulic separation and open water volume from the buffer tank helps with primary system flow rates and defrosting cycles. The full product range also boasts: a 28mm heat pump magnetic and particle filter, secondary circulation pump, 28mm 3-port diverter valve, 28mm 2-port heating zone valve, filling loop, pressure gauge, domestic hot water immersion heater and wiring centre all fitted and wired as standard. The Hydro CYL range sizes are: 150 Ltr, 170 Ltr, 200 Ltr, 250 Ltr and 300 Ltr all with internal 50 Ltr Buffer Tanks Plus 150 Ltr and 170 Ltr Slimline models both with internal 30 Ltr Buffer Tanks. Pre-Plumbed and Pre-Wired Heat Pump stainless steel Cylinder range including key system components with 2 or 3m2 coil size area.

Product Information


Hydro-CYL Range with Internal Buffer Tank Datasheet
.pdf
Download PDF • 426KB

Telford Cylinders Warranty & Returns Policy 2024
.pdf
Download PDF • 95KB



Technicial Information


Hydro-CYL Wiring Schematic
.pub
Download PUB • 311KB

Ebac to Hydro-CYL Wiring Schematic 3rd-Part Control V6 (June 2024)
.pdf
Download PDF • 1.93MB

150L-50L H-PUMP ROBUS V5
.pdf
Download PDF • 326KB

170L-50L H-PUMP ROBUS V5
.pdf
Download PDF • 326KB

200L-50L H-PUMP ROBUS V5
.pdf
Download PDF • 332KB

250L-50L H-PUMP ROBUS V5
.pdf
Download PDF • 333KB

300L-50L H-PUMP ROBUS V5
.pdf
Download PDF • 331KB

150L-30L H-PUMP ROBUS
.pdf
Download PDF • 220KB

170L-30L H-PUMP ROBUS
.pdf
Download PDF • 273KB



bottom of page